초음파 유량계-비삽입/크램핑 (S-1158BS)
(Ultrasonic Flow Meter-clamp on)
◆ 개요(Description)
▶ 비파괴 (비삽입) 초음파 방식 유량계
▶ 간단한 조작, 편리한 설치, 안정된 성능
▶ 고정 분리가능 장기적인 인라인 측정입니다.
▶ 벽장착형, 패널 장착형
및 방폭형을 포함한 3가지 유형의
컨버터
▶ 1% 높은 정밀도
▶ Dn15mm에서 Dn6000mm까지의 파이프
크기 넓은 측정 범위
▶ 지난 512일 / 128개월 / 10 년의 적산 데이터
▶ 전원 켜기 및 끄기 이벤트의 마지막 64회 시간 및 해당 유량
▶ 지난 32 일의 작업 상태
▶ 온도 변환기를 연결하고 열 / 에너지 측정 가능
▶ SD카드 메모리 지원(option)
● 사용전원: AC220V or DC24V (1.5W 소모량)
● 프로토콜:
MODBUS,
M-BUS, Fuji extended protocol and other factory protocol
● 기본 케이블
20m, 500m 연장 가능
● RS485 (1000m 전송거리)
메인 유니트 |
정밀도 |
Better than ±1% |
반복도 |
Better
than 0.2% |
|
측정원리 |
Transit-time
measuring principle |
|
측정속도 |
500ms |
|
화면 표시 |
LCD with
backlight, display accumulated flow/heat, instantaneous flow/heat, velocity,
time etc. |
|
신호출력 |
Analogue
output: 4-20mA or 0-20mA current output. Impedance
0∼1kΩ.
Accuracy 0.1%. |
|
OCT
output: Frequency signal (1~9999HZ) |
||
Relay
output: over 20 source signal (no signal, reverse flow etc.) |
||
RS485
serial port |
||
입력기능 (온도) |
Three
analogue input |
|
Three-wire
PT100 resistor input (optional) |
||
기능(적산) |
Automatically record the totaliser data of the last 64
days / 64months / 5 years; The power-on time and corresponding flow rate of the
last 64 power on and off events. Allow manual or automatic flow loss compensation The instrument working status of the last 64 days |
|
파이프 클램핑
|
재질 |
Steel,
stainless steel, cast iron, cement pipe, copper, PVC, aluminum,
FRP etc. Liner is allowed |
크기 |
15-6000mm |
|
직선 파이프 |
In the
upstream it must be beyond 10D, in the downstream it must be beyond 5D, in
the upstream the length must be beyond 30D fro the access of the pump. (D
stands for pipe diameter) |
|
유체
|
유형
|
Water, sea
water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds
of oils which can transmit ultrasonic single uniform liquid |
온도 |
Standard:
-30˚C - 90˚C ,High-temperature:-30˚C -
160˚C |
|
탁도 |
Less than
10000ppm, with a little bubble |
|
유체방향 |
Bi-directional
measuring, net flow/heat measuring |