Weight

1.4 kg with batteries

Size (H x W x L)

200 mm x 225 mm x 80 mm

Operating temperature range

From -30 C to +55 C

Supply voltage

15V / 2,5А DC

External power supply

Power Supply 220В AC

Working hours

not less 10 hours of operation from the built-in battery

Battery

Li-ion 10.8V, 5000 mА/h

Transducer connectors

2 Х Lemo00,1 Х Lemo 16

Firmware Upgrade

Self-powered by USB

Menu Language

Russian, English

Interface

USB

Memory

200 settings with A-signal

1000 monitoring protocols and scan results

Display

Color high contrast, TFT 640 x 480 pixels, (130 x 100 mm).

Changing the color schemes of the screen for viewing and lighting conditions

Yes

Processing the image on the screen after “freezing” the screen

Full-featured processing and analysis

Support for the weld inspection standard AWS D1.1

Yes, with automatic calculation D1.1 Ratio

Comparison with the saved reference signal

Automatic in the entire amplification range

Estimation of the size of defects in the classical flaw detector mode

built-in ADD diagrams

Amplitude measurement

In percentage of the height of the screen,

In dB relative to the threshold level in the zone,

In dB relative to the reference signal,

By DAC

Automatic Defect Alarm

Light, sound

Simultaneous display of signals on the screen in the PR mode in manual mode

S-scan

А-scan + S-scan,

А-scan + B-scan,

S-scan + B-scan,

А-scan + S-scan + B-scan

Determination of linear dimensions between reflectors in S-scan

By two markers, set manually or automatically

Calculation of the coordinates of the reflectors on the S-scan

Automatically in the entire range of S-scan, using a mathematical model of the prism in the memory of the flaw detector, the accuracy of determining the coordinates to 0.1mm

Algorithm for finding a defect in the testeing zone

Automatically on the maximum amplitude of the signal in the zone, auto at the maximum amplitude of the signal on the selected beam, manually

Control zones

Rectangular zone for allocation of a part of a signal on an S-scan with an accuracy of setting boundaries to 0.1mm

2 independent time-domain zones

Display of signals on the screen (visualization)

А-scan, B-scan, С-scan, D-scan, S-scan, L-scan, TOFD

Digital signal filtering

Yes

Analog Signal Filtering

Yes

Additional key + dB

6

Electrical damping of the converter to increase the resolution

25 Ω, 50 Ω, 600 Ω

Gain Control Range

100 dB, in step 0.5, 1, 2, 6 dB

Amplifier

Broadband: 0.1-20 MHz, with the option of narrowband filters

B-Scan

Display of real weld geometry (True-to-geometry imaging)

Using TOFD

Single-channel TOFD with recording by the path of probe or time

Using scanners

Any 2-axis scanners with optical encoders, scans in the memory of the device, analysis of scans in the device, and in a special analysis software

Welded joint geometry designer

Built-in helper, displaying the cutting of the seam on the scan image

Automatic calibration of ultrasonic velocity

Yes

Automatic calibration of the control range for a given seam thickness

Yes

Frequency of recurrences

Is automatically set depending on the set parameters

Sounding impulse

Radio pulse amplitude of 50 V, with adjustable number of periods (0.5-5)

Speed range

100 – 10 000 m/s

Scanning mode

S-scan (sector scan), L-scan (linear scan with a constant angle)

Scan

Min.: 0 – 5 mm

Max.: 0 – 3200 mm (depends on the operating modes and the converter)

In step 0.1, 1, 5, 10 mm

Automatic calibration of the delay in the prism

With V-2 calibration block from reflector, calibration of TOFD converters

Leveling of sensitive in depth

TVG, up to 10 dB / μs, with an accuracy of 0.01 dB / μs

Aligning the sensitivity at the corners while scanning

2D correction (10 lines in depth, 20 points for corner correction each)

Adjusting the angle scan angle

From 0,3 to 2 degrees

Adjustment of working aperture

4, 8 and 16 simultaneously working elements

Adjustment of the FR parameters of the converter

Automatic from non-volatile memory of the device

Algorithm for signal processing

Digital signal focusing using the C-SAFT / TFM method

Type of PHAs used

Any classic 16-channel PA

Gross weight, not more than

8 kg