복합 경도계-초음파&반발 (T-UD3)
(Combined Hardness Tester)
◆ 개요(Description)
▶ 초음파경도(UCI) & 반발경도(Leeb) 모두 사용 가능
▶ 초음파 접촉 (UCI) 프로브는 최소 두께 (1mm)의 두께, 복잡한 표면 형상의 물체 및
표면 경화 층 경도 측정에 사용되는 경도 측정
▶ 반발경도(Leeb)는 강철, 비철금속, 주철, 주조 입자 (coarse-grained materials) 등으로 만들어진
거대한 물체 (5kg 이상, 10mm 이상)의 경도 측정에 사용
l 반발경도(Leeb)는 UCI 법을 적용하지
않은 경우 UCI 경도 측정법을
완벽하게 보완
l 스테인리스 강, 주철, 청동, 알루미늄과 같은 광범위한
재료의 경도를 자동으로 계산
l 간단하고 빠른 측정
▶ 테스트 측정 규정:
l UCI 경도 측정 방법은
ASTM A1038규정
l Leeb 경도 측정 방법은 ASTM A956 규정
▶ 측정이 끝나면 내장 된 사진 카메라로 샘플 사진을 찍고 측정 결과가 나온
위치에 정확한 결과를 표시 (그림 당 최대 5 개의 결과).
▶ 저장된 측정 결과와 그림은 경도 시험기와 함께 제공되는
"AWP"소프트웨어를 사용하여 PC로 전송
▶ 극저온에서의 경도 측정(-25~-45°C)
▶ CE 인증
█ 주요 기능
▶ 작은 인덴터 임프린트 (샤프트의 거울 표면, 넥, 블레이드, 기어 이빨 등)
▶ 표면 경화 층 경도 측정
▶ 광범위한 경도 시험
▶ 다양한 측정 모드
▶ 88가지 재료 및 경도 스케일 (캘리브레이션)
▶ 모든 범위의 눈금 보정
▶ 측정의 편의성 및 용이성
▶ 최적화 된 버튼 수
▶ 밝은 백라이트가 적용된 대형 풀 컬러 그래픽 디스플레이
▶ 철저한 보고서를 위한 내장형 포토 카메라
▶ 자동 프로브 유형 인식
▶ 연결된 프로브 유형 표시
▶ 교정은 UCI 프로브 메모리에 저장
▶ 확장 된 작동 온도 범위 (서리, -40°C까지)
▶ PC와의 내부 메모리 및 통신
▶ 새로운 스마트한 직관적 인 메뉴 버튼
▶ 무선 미니 프린터 (선택 사양)
▶ 방수 하우징
▶ 고무 범퍼 보호 하우징
▶ 내부 시계
▶ 두께가 1mm를 초과하는 모든 질량 생성물
(작은 부품, 얇은 벽의 구조물, 파이프, 탱크, 강판, 복잡한 형상의 제품, 금속 코팅의 경도 시험 등)에 대한 경도 값
▶ 다른 운영 모드:
l
그래프: 그래프 작성 모드
l
히스토그램: 히스토그램 작성 모드
l
통계: 현재 측정 세트에 대한 통계를 제공합니다.
l
스마트: 잘못된 측정 값 필터링
l
신호: 프로브 신호를 표시합니다 (Leeb 프로브에만 해당)
UCI probe types |
o
1kgf (10N) 2.2 lbf o
5kgf (50N) 11lbf o
10kgf (98N) 22lbf |
Leeb probe types |
o
D o
DC o
DL o
C o
D+15 o
E o
G |
Measuring range |
o
HRC:20~70 o
HB:90~650 o
HV:230~940 o
Tensile strength, MPa: 370~1740 o
User calibrations for any range (for example: HV100-1600) |
Measuring accuracy |
o
HRC:±1.5%HRC or 2HRC o
HB:±3%HB or 10HB o
HV:±3%HV or 15HV |
Standards |
o
ASTM A1038 o
ASTM A956 o
ASTM E140 |
Indenter |
UCI probe – Diamond indenter |
Measuring direction |
Any direction 360° |
Data storage |
Limited only by the memory
card up to 32Gb |
Communication |
Upload data to PC and export
as a spreadsheet (USB cable and software included ) |
Hardness scales |
o
UCI probe – HRC, HB, HV o
Leeb probe – HRC, HRB, HB, HV, HL, MPa o
Additional custom scales for calibration |
Materials |
o
Ultrasonic (UCI) probe – pre-calibrated for steel o
Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron,
stainless steel, aluminum, bronze, brass, copper o
Additional custom materials for calibration |
Data display |
o
Load applied/contact (UCI) o
Angle (Leeb) o
Single test result o
Max, Min, Average of tests o
Number of tests, o
Deviation o
Var. coeff. o
Histogram, Signal and Smart Modes (Filter of incorrect measurements). |
Indication |
Color LCD display (320×240) |
Operating environment |
o
Temperature:-20°C~40°C o
Humidity: 30%~80%R.H. |
Power supply |
DC 4,5V (3 pcs batteries AA) |
Instrument dimensions |
160x75x30mm |
Net weight |
Approx. 0.3kg (without
probe) |
Gross weight (package) |
2kg |
Battery life |
Approx. 10 hours. |
Warranty |
3 (1+2) years |
█ 기본 포함 장비(Basic Included Equipment)
l Hardness tester
l UCI probe (10N, 50N or 98N for choice)
l Leeb probe (D type)
l 3pcs AA batteries
l Charger
l USB cable
l Operating manual
l Calibration certificate
l Software for PC
l Case
█ 옵션 장비(Optional
equipment)
l Additional UCI and
Leeb probes (different types)
l Different colors of
rubber bumper protected case
l Wireless printer
l Batteries
l Chargers
l Hardness tests blocks
l Set of support rings
for D, DC type Leeb probes
l Impact bodies
for Leeb probes
l Portable grinding
machine
l Case for hardness
tester
l Can be equipped with
two types of UCI probes: